Difference between revisions of "Bitron Throttle"
From Unofficial Zero Manual
BrianTRice (talk | contribs) |
(No difference)
|
Latest revision as of 01:24, 7 April 2020
2015+ models use a new HAL-based (Hall-effect active device) sensor from Bitron which can't be replaced easily by Domino or similar
- Product reference: Bitron HAL-based throttle
- Connectors
- Via Keith's investigation
- 8 wire output, bundled into two pairs of 3 wires for potentiometer outputs.
-
- Sumitomo connector 6188-0779
- Sumitomo connector 6189-1240
- The hall-effect sensor may be a potentiometer wired up as a voltage divider as follows:
| Wire | Twist | Voltage |
|---|---|---|
| Brown | None | 0.5 |
| Full | 4.5 | |
| Brown/Red | None | 4.5 |
| Full | 0.5 |
