Difference between revisions of "Gen2/Meanwell Charger"
From Unofficial Zero Manual
< Gen2
BrianTRice (talk | contribs) (update links) |
(No difference)
|
Latest revision as of 00:06, 10 July 2020
The Meanwell HLG-320H-54A power supplies are used as onboard chargers for early Gen2 Zero models (2013 and the 2014FX) and are directed by the CCU board since they lack a CANBus integration.
- Configuration
- For SDS Platform models, 4 chargers are wired 2s2p for 1.3kW total.
- If any power supply unit fails, the charger should drop to half its output capacity (whether by blowing a fuse or faulting open internally).
- For XMX Platform models, 2 chargers are wired in serise (2s1p) for 650W total.
- If either power supply unit fails, the charger will fail to produce output entirely.
- Repair
- See Half of a charger fail.
- It is possible to replace only the dead charger if you have one.
- You'll need big crimping tools and shrinking sleeves.
- Zero sends the full pack of four chargers.
- Articles
