OEM Touring Screen Install

This installs the OEM Touring Windscreen on any Zero model.

Notes

Used a MY2016 DSR

OEM Screens are from MRA; most MRA screens for naked bikes have the same hardware type, so these instructions apply to the commuter screen as well, aside from the spoiler.

Tools (common to many MRA mounts' hardware)

• 6mm Allen key wrench for the handlebar clamp bolts and replacements.
• 3mm Allen key wrench for the screen mounts.
• (Optional) flat blade screwdriver to set spoiler adjustment tension/firmness.

Contents of kit (TOURING SCREEN 10-08058 $250 usd)

• Windscreen assembly, plastic edge piping trim and two metal clips.

• A lot of these things are shrink wrapped to a card.

Steps

1. Assemble ball socket windscreen things to be tensioned by nuts and socket head bolts

   

2. Orient ball mount assemblies and slide on handlebar mounting brackets

   

3. Prepare windscreen through-mount pieces and affix to windscreen

   

4. Mount to handlebars using provided bolts to replace the top stock handlebar clamp bolts. Torque per the owner's manual.

   

5. Add piping

   Begin with one end

   

   Add a clamp

   

   Trim to length and add the other clamp. If enough is left over you could attach some to the bottom.

   

Left-over parts

• Handlebar clamp bolts
• Piping scrap.