Aftermarket/Bar Ends
From Unofficial Zero Manual
Bar ends (like Bar End Mirrors) work if they fit the handlebar ends:
- Outer diameter
- 7/8" (22mm)
- Inner diameter
- 5/8" (14mm)
- This page was last modified on 31 March 2020, at 03:50.
-
This site and its contents are not sponsored by, associated with, affiliated with, or endorsed by Zero Motorcycles.
All logos and icons are owned by their respective owners.
The Zero logo is used only under fair use for subject matter identification. Use of the logo is not an endorsement or sign of association with the Zero Motorcycle brand.
