Gen2/Low Power Battery Positive Fuse

From Unofficial Zero Manual
< Gen2
Revision as of 00:30, 2 July 2020 by BrianTRice (talk | contribs) (errata)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This fuse protects low power loads on the battery B+ bus.

Loads
Specifications
SPT3.15A 5×20mm
Removal
  • De-energize the bike (key off and unplug external charging sources).
  • Uncover the fuse
    SDS Platform: remove the seat.
    XMX Platform: Uncover the left panel under the battery compartment.
  • Twist the cap counterclockwise (CCW) and pull.
  • Cover the inlet as appropriate to avoid fault possibilities.
Fuse Holder
FPG2, Schurter part no 3101.0325 via DigiKey
References
Retrieved from "http://zeromanual.com/index.php?title=Gen2/Low_Power_Battery_Positive_Fuse&oldid=7136"