XMX Platform/Tail Wiring
From Unofficial Zero Manual
XMX Platform wiring is mostly the same as for the SDS Platform.
| Photo | Connector | Function | Wire Color |
|---|---|---|---|
|
Standard Suzuki or Honda brake light (3-wire) | Tail light power | Brown |
| Brake light power | White with red stripe | ||
| Negative/Return | Black | ||
Single pin connector
|
Left turn signal power | Green | |
| Negative/Return | Black | ||
| Right turn signal power | Grey | ||
| Negative/Return | Black |
- Note about Braking Regen
- Braking regen is activated by the pressure switch on the front brake lever or hydraulic switch on the rear brake pedal, through the rear brake power circuit.
- If that circuit doesn't complete (due to a failed bulb or wiring disconnect), braking regen seems to not activate.
- Routing
- Turn signal wires run through a pair of holes where the tail stalk meets the subassembly underneath the tail.
