Difference between revisions of "Gen2/Rear Axle"

From Unofficial Zero Manual
Jump to: navigation, search
(link update)
 
(No difference)

Latest revision as of 23:17, 31 March 2020

The rear axle is hollow, threaded on the right side and capped on the left for swingarm fitment.

Axle measurements
Years Inner Diameter Outer Diameter Pitch
2013-2014
2015+ 11mm 20mm 1.25mm

Removal

This removes the Rear Axle part of Rear Wheel Removal.

Tools
  • 27mm socket
  • Breaker bar
Instructions
  1. Place the motorcycle on a lift or rear stand
    Raise just enough that the rear wheel spins freely.
  2. Mark/photograph where the alignment marks reside on each side of the axle for re-alignment when re-installing the wheel.
  3. On the right side, loosen the rear axle nut (27mm) with the breaker bar.
  4. Remove the rear axle nut.
  5. Pull the axle part-way out so that the wheel can be moved forward enough to loosen the belt.
  6. Pull the belt off of the rear sprocket.
    Let it hang outside of the swingarm slightly to avoid interfering with the wheel.
  7. From the left side, pull the axle through the wheel.


Install

To replace the rear axle, see rear wheel replacement.