Difference between revisions of "Gen2/Swingarm Tube"

From Unofficial Zero Manual
Jump to: navigation, search
(link update)
 
(No difference)

Latest revision as of 21:45, 31 March 2020

There is a hollow tube through the swingarm across the arms forming a join point for the rear shock to the frame tube on the SDS platform.

Swingarm Tube with measurements
Its shape is flattened on the rear side, presumably to clear the largest-diameter potential tire.
It makes a reasonable storage tube if some padding or caps are used to secure the cargo there (like a charging cord).
Measurements
Inner diameter 75mm 2.91"
Horizontal width to flat side 68mm 2.68"
Swingarm greatest width below tube 295mm 11.61"
References
Re: Through-frame security aperture size?