5,366
edits
Changes
no edit summary
<onlyinclude>
Lower plastics for the SDS Platform involve two side pieces to direct air towards the motor, and one in front to cover the battery.
: There is some provision for guarding the battery compartment against an impact from the front wheel in the case of a collision.
[[File:2017-zero-s-battery-front.jpg|thumb|2017 Zero S Lower Front Plastics]]
;2012-2013
: Relatively angular and have their own bolt mount pattern.
;2014+
: Lower plastics have a sculpted re-design to deliver more airflow to the motor for cooling.
;2017+
: Single longbrick models (ZF6.5 and ZF7.2) have lower plastics with a latch and swinging hinge to access the storage area behind the half-size battery compartment.
</onlyinclude>
;Removal
: See [[SDS Platform/Lower Plastics Removal|Lower Plastics Removal]]
[[Category:Bodywork]]
Lower plastics for the SDS Platform involve two side pieces to direct air towards the motor, and one in front to cover the battery.
: There is some provision for guarding the battery compartment against an impact from the front wheel in the case of a collision.
[[File:2017-zero-s-battery-front.jpg|thumb|2017 Zero S Lower Front Plastics]]
;2012-2013
: Relatively angular and have their own bolt mount pattern.
;2014+
: Lower plastics have a sculpted re-design to deliver more airflow to the motor for cooling.
;2017+
: Single longbrick models (ZF6.5 and ZF7.2) have lower plastics with a latch and swinging hinge to access the storage area behind the half-size battery compartment.
</onlyinclude>
;Removal
: See [[SDS Platform/Lower Plastics Removal|Lower Plastics Removal]]
[[Category:Bodywork]]