Difference between revisions of "SDS Platform/Running Light Replacement"

From Unofficial Zero Manual
Jump to: navigation, search
(remove suggestion to tilt headlamp from the bottom fasteners; typically not workable)
 
(No difference)

Latest revision as of 18:50, 29 December 2019

This replaces the W3W running light bulb on the SDS Platform Headlamp.

Steps
  1. Remove the headlamp
  2. Turn and/or wiggle the rubbery boot at the rear of the running light to extract it from the headlamp assembly.
    Optionally, unplug the running light wiring connector first, if it makes it easier to manipulate.
  3. Remove the bulb and insert its replacement.
    As with any bulb, take care not to leave skin oil or other residue on the bulb's surface, which could thermally stress it over time.
  4. Re-insert the running light by its rubbery boot into the headlamp assembly.
  5. Re-connect the running light wiring connector if appropriate.
  6. Re-install the headlamp.
Retrieved from "http://zeromanual.com/index.php?title=SDS_Platform/Running_Light_Replacement&oldid=5377"