5,366
edits
Changes
remove suggestion to tilt headlamp from the bottom fasteners; typically not workable
<onlyinclude>
This replaces the W3W running light bulb on the [[../Headlamp|SDS Platform Headlamp]].
;Steps
# [[../Headlamp Removal|Remove the headlamp]]
# Turn and/or wiggle the rubbery boot at the rear of the running light to extract it from the headlamp assembly.
#: Optionally, unplug the running light wiring connector first, if it makes it easier to manipulate.
# Remove the bulb and insert its replacement.
#: As with any bulb, take care not to leave skin oil or other residue on the bulb's surface, which could thermally stress it over time.
# Re-insert the running light by its rubbery boot into the headlamp assembly.
# Re-connect the running light wiring connector if appropriate.
# Re-install the headlamp.
</onlyinclude>
[[Category:12V Electrical Procedure]]
This replaces the W3W running light bulb on the [[../Headlamp|SDS Platform Headlamp]].
;Steps
# [[../Headlamp Removal|Remove the headlamp]]
# Turn and/or wiggle the rubbery boot at the rear of the running light to extract it from the headlamp assembly.
#: Optionally, unplug the running light wiring connector first, if it makes it easier to manipulate.
# Remove the bulb and insert its replacement.
#: As with any bulb, take care not to leave skin oil or other residue on the bulb's surface, which could thermally stress it over time.
# Re-insert the running light by its rubbery boot into the headlamp assembly.
# Re-connect the running light wiring connector if appropriate.
# Re-install the headlamp.
</onlyinclude>
[[Category:12V Electrical Procedure]]