5,366
edits
Changes
no edit summary
<onlyinclude>
[[File:2013-zero-s-seat-pan.png|thumb|400px|Zero S Seat Pan]]
The S Platform seat is a proprietary design and fitment.
;Seat retaining features
* A metal bracket with holes for retaining bolts that mount through the frame from the outside.
*: The bracket also serves to align the seat horizontally since the outer sides of the bracket must slide directly along the inside track of the frame.
*: [[File:2013-zero-s-seat-bracket.png|200px|Zero S Seat Bracket]][[File:2013-zero-s-seat-bracket-side.png|200px|Zero S Seat Bracket]]
*: The bracket's part number is 20-0508307 and when separately ordered has been observed to have slotted holes to join to the seat for some adjustability.
* In front and center, a pair of catches engages the frame's [[#Y-Shaped Underseat Frame|Y-shaped centerpiece]] under a pair of pins.
* In front on the lowest outside edge, a pair of tabs point downwards that should slide inside the frame rails.
*: Without some care, these easily wind up outside the frame, flexing the seat pan and scuffing the frame lightly with plastic debris.
;Under The Seat
:[[File:dsr-under-seat.JPG|300px|thumb|2016 DSR tail layout]]
* The large [[#Controller|controller]] dominates the space underneath the seat, on the lowest part of the tail structure.
*: There's no room around the controller for anything but its cabling and a conduit for tail lighting.
* In front, the 12V fuse block is the main item to access.
*: There are cables between the battery and the controller; the MBB and DC-DC converter are beneath these cables.
* Behind the [[#Controller|controller]] is the [[#Tail_Wiring|tail wiring]] area which has a little room for a tire patch kit or some tools.
*: Of course, storing tools for removing the seat there is counter-productive.
; Dimensions
* Seat
* Seat Bolts
*: M8 with 1.25mm thread, 50mm long with a round end for aligning the seat bracket with the frame.
*: With the top rack installed, the diameter of the hole around the head is slightly under 15mm, with a maximum offset of about 12mm.
* Seat Bracket Bolts to Seat Pan
</onlyinclude>
[[Category:Component]]
[[Category:Seat]]
[[File:2013-zero-s-seat-pan.png|thumb|400px|Zero S Seat Pan]]
The S Platform seat is a proprietary design and fitment.
;Seat retaining features
* A metal bracket with holes for retaining bolts that mount through the frame from the outside.
*: The bracket also serves to align the seat horizontally since the outer sides of the bracket must slide directly along the inside track of the frame.
*: [[File:2013-zero-s-seat-bracket.png|200px|Zero S Seat Bracket]][[File:2013-zero-s-seat-bracket-side.png|200px|Zero S Seat Bracket]]
*: The bracket's part number is 20-0508307 and when separately ordered has been observed to have slotted holes to join to the seat for some adjustability.
* In front and center, a pair of catches engages the frame's [[#Y-Shaped Underseat Frame|Y-shaped centerpiece]] under a pair of pins.
* In front on the lowest outside edge, a pair of tabs point downwards that should slide inside the frame rails.
*: Without some care, these easily wind up outside the frame, flexing the seat pan and scuffing the frame lightly with plastic debris.
;Under The Seat
:[[File:dsr-under-seat.JPG|300px|thumb|2016 DSR tail layout]]
* The large [[#Controller|controller]] dominates the space underneath the seat, on the lowest part of the tail structure.
*: There's no room around the controller for anything but its cabling and a conduit for tail lighting.
* In front, the 12V fuse block is the main item to access.
*: There are cables between the battery and the controller; the MBB and DC-DC converter are beneath these cables.
* Behind the [[#Controller|controller]] is the [[#Tail_Wiring|tail wiring]] area which has a little room for a tire patch kit or some tools.
*: Of course, storing tools for removing the seat there is counter-productive.
; Dimensions
* Seat
* Seat Bolts
*: M8 with 1.25mm thread, 50mm long with a round end for aligning the seat bracket with the frame.
*: With the top rack installed, the diameter of the hole around the head is slightly under 15mm, with a maximum offset of about 12mm.
* Seat Bracket Bolts to Seat Pan
</onlyinclude>
[[Category:Component]]
[[Category:Seat]]