Gen2/Motor and Drive System Parts
From Unofficial Zero Manual
< Gen2
- See Also
 Warning: | This page is automatically generated from publicly available data
|
| Years | Models | Subsystem | Part No | Type | Description | Notes | Diagram | Quantity | Link |
|---|---|---|---|---|---|---|---|---|---|
| 2014-2017 | Gen2 | Fasteners | 90-02056 | Screw | HEXAGON SOCKET COUNTERSUNK HEAD SCREW M10X25-8.8 MOTOR SHAFT | NOTE: Bolt used to hold front sprocket in place onto the motor shaft.
|
Motor and Drive System | 1 | [1] |
| 2014-2016 | S(R)+DS+XMX | 90-03248 | Bolt | HEXAGON SOCKET THIN HEAD CAP SCREW M8X30-8REAR SPROCKET | 1,4 | [2] | |||
| 2014-2019 | SDS+FX | 90-05179 | HEXAGON SOCKET HEAD CAP SCREW ISO 4762 M8X60-8.8 ZM-F-01 REV 03 | 1,3 | [3] | ||||
| 2014-2016 | S+DS(R)+XMX | 90-07298 | Screw | HEXAGON SOCKET SET SCREW CUP POINT KNURLED ISO 4029 TYPE V M4X6 ZM-F-01 REV 03 ZM-L-01 REV 01 | NOTE: 2 set screws are needed for an SR motor. | 1 | [4] | ||
| 2014-2019 | Gen2 | 90-08037 | Socket | HEXALOBULAR (6 LOBE) SOCKET FLAT HEAD COUNTERSUNK SCREW ISO 14582 M8X30-10.9 ZM-F-01 REV 04 | NOTE: Used for both drive side rear motor mount or rear sprocket mounting depending on model.
|
1,2 | [5] | ||
| 2018-2019 | 90-08108 | Screw | HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREW ISO 14581 M10X25-10.9 ZM-F-01 REV 03 | NOTE: Motor sprocket bolt | 1 | [6] |
