5,366
edits
Changes
extract from Advanced Modifications
<onlyinclude>
This adapts larger footpegs to replace Zero's stock [[Footpegs]].
[[File:NewFootPeg.jpg|thumb|Honda footpegs with rubber pad]]
[http://electricmotorcycleforum.com/boards/index.php?topic=7331.msg61153#msg61153 David Walsh reports]
<blockquote>
Hi all, I've added a few farkles to my 2012 DS...
As I reused the original Zero pins, I found these were a couple of mm larger diameter than the pins fitted to the Honda foot-pegs, so I drilled them out. As they are aluminum, this is easy to do.
I then found that while they would still hinge up out of the way, they were a little larger than the Zero pegs, so I filed off a mm or so off of them and.. They fitted, worked fine and are comfortable.
I bought these aftermarket ones [cheap and good :) ] :
http://www.ebay.co.uk/itm/Motorcycle-Footrest-Foot-Pegs-For-Honda-CBR-750-600-1300-Yamaha-Suzuki-Kawasaki/152050093683"
</blockquote>
;Materials
: The item he purchased was: EAN/UPC 931152292558
;Tools
: Metal file
: Drill
;Steps
# Drill out the pin fitting to match the Zero footpeg pin diameter.
# File off ~1mm for fitment.
</onlyinclude>
[[Category:Advanced Modification]]
This adapts larger footpegs to replace Zero's stock [[Footpegs]].
[[File:NewFootPeg.jpg|thumb|Honda footpegs with rubber pad]]
[http://electricmotorcycleforum.com/boards/index.php?topic=7331.msg61153#msg61153 David Walsh reports]
<blockquote>
Hi all, I've added a few farkles to my 2012 DS...
As I reused the original Zero pins, I found these were a couple of mm larger diameter than the pins fitted to the Honda foot-pegs, so I drilled them out. As they are aluminum, this is easy to do.
I then found that while they would still hinge up out of the way, they were a little larger than the Zero pegs, so I filed off a mm or so off of them and.. They fitted, worked fine and are comfortable.
I bought these aftermarket ones [cheap and good :) ] :
http://www.ebay.co.uk/itm/Motorcycle-Footrest-Foot-Pegs-For-Honda-CBR-750-600-1300-Yamaha-Suzuki-Kawasaki/152050093683"
</blockquote>
;Materials
: The item he purchased was: EAN/UPC 931152292558
;Tools
: Metal file
: Drill
;Steps
# Drill out the pin fitting to match the Zero footpeg pin diameter.
# File off ~1mm for fitment.
</onlyinclude>
[[Category:Advanced Modification]]
