Z-Force Motor/Electrical Connections

The Z-Force motor's stator is connected to the controller for power and position feedback.

Power Inputs

3-phase / Y-shaped (120° phase offset) power inputs from the controller. A (M1) B (M2) C (M3)

Motor-controller power connections

Sensor Connections

8-pin Metri-Pack 150 (Mouser p/n 829-12047937) Terminal: Mouser p/n 829-12084200 Retainer: Mouser p/n 829-15324525 Seal: Mouser p/n 829-15324973 Seal: Mouser p/n 829-12059168-B Motor Position (Cosine) / white Motor Position (Sine) / blue Motor Position (Ground) / black unused VDD (5V) / red Shield / green Temperature (negative) / yellow Temperature (positive) / yellow

2013 motor sensor connectors