Difference between revisions of "XMX Platform/Tail Extension"

From Unofficial Zero Manual
Jump to: navigation, search
 
(No difference)

Latest revision as of 01:56, 7 April 2020

The XMX Platform tail extension supports the license plate, turn signals, and reflectors from the underside of the tail.

The extension runs along the inside/underside of the tail plastics.
Construction
The extension is made of two cast aluminum pieces, upper and lower, that fasten together.
Wiring
12V wiring runs through holes in the bracket's bolted mounting to the underside of the tail to each turn signal.
The barrel connector pins for the turn signals are part of the wiring inside the tail behind the seat.
12V wiring runs through the extension to the license plate support bracket to power a low level illuminator bulb.