XMX Platform/Front Panel
From Unofficial Zero Manual
The XMX Platform front body panel is a plastic cover over the front of the frame.
- It protects the 12V Fuse Block and other wiring that leads around the steering head.
This removes the front body panel on the XMX Platform.
- 3mm Allen key.
- ??mm hex socket for the seat.
- Remove the seat.
- Push the center pin for the plastic pop rivets in the front shoulder area of the panel, then remove the rivet.
- Use the 3mm Allen key to loosen and remove the 5 bolts on each side around the permiter of the panel.
- Pull off the panel.