Charge Tank

From Unofficial Zero Manual
Revision as of 21:37, 22 January 2020 by BrianTRice (talk | contribs) (link update)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The most convenient charging option for the SDS Platform is the OEM-supported Charge Tank for 2015 models onward.

It's more convenient than an Elcon 2500, but for subtle reasons seems to be slightly less compatible with a range of charging stations (see the User Guide).

Model Compatibility
  • 2015+ S-platform bikes only (S/DS/SR/DSR)
  • Incompatible with the OEM Power Tank accessory since it occupies the same bulky tank location.
Station Compatiblity
  • Only available with a J1772 inlet.
  • Mennekes / Type 2 single-phase adapter offered for Europe, Australia, NZ.
Location
It only fits in the Power Tank area (so they can't both be installed) and requires a dealer-only installation (very involved).
Operation
The bike must be keyed on before initiating a charge cycle with the Charge Tank.
Once charging, the bike can be keyed off; the Charge Tank and onboard charger will keep the bike in charge mode.
Install

Initial 2.5kW Revision

Initially, the Charge Tank was released supporting 2.5kW.

2.5kW (discontinued)
Release
Released 2016, discontinued late 2017 in favor of the Charge Tank/6kW Revision version.
Capacity
Provides its own charging power (2.5kW) while also engaging the onboard charger in parallel, for a total of 3.8kW
Connections
The accessory charging port circuit is not impacted by this charging circuit.
Hardware
The core equipment appears to be a TSM2500 charger.


6.5kW Revision

Capacity
Provides 6.5kW but does not engage the Onboard Charger unless connected to 110V power.
If the onboard charger is separately engaged (on 110V or 220V circuits), a potential total of 7.8kW is available.
  • Unless the bike is a single-long-brick bike (7.2kWh) in which case it would exceed the ~7kW limit set by the 1C rate limit on the contactor.
Release
released October 2017.
  • Initially only available as a factory installed option for 2018+ models
  • Now available as a dealer-installed accessory for 2015+ models.
Hardware
The hardware seems to have been developed by Zero and as such is proprietary.
Reference
Zero Charge Tank User Guide
install video by a dealer showing what it looks like under the tank
Zero Charge Tank 6kw Installation Instructions