Search results
Create the page "1" on this wiki! See also the search results found.
Page title matches
-
49 bytes (5 words) - 22:29, 23 January 2020
Page text matches
- :* Primarily 1/2" diameter square and circular tubing. :* The rack [https://www.happy-trail.com/Instructions/HTPZ0-1-1.1.pdf mounts to the seat bolts and peg supports] instead of the smaller holes38 KB (5,571 words) - 17:48, 18 June 2020
- The bolt/thread specification appears to be M10 with x 1.25 pitch, left-hand-threaded on the right side. ...ting them outboard of the hand guards and securing with a longer screw (M8-1.25 x 70mm, SS philips head from Home Depot will do).14 KB (2,111 words) - 21:40, 17 July 2023
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}1 KB (133 words) - 06:12, 24 January 2020
- : An effective 60mpg has been noted in one case for a full charge (1.5 gallons for a 90 mile range presumably). :* This requires attending to the bike on a (1 month, say) schedule to recharge it until cel balancing is restored fully,18 KB (2,775 words) - 18:36, 29 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}565 bytes (80 words) - 22:17, 30 March 2020
- |S ||33.1 || 841 |XU ||31.1 || 7905 KB (673 words) - 21:16, 23 June 2020
- ** [http://www.archive.org/details/NEETSModule01 Module 1, Introduction to Matter, Energy, and Direct Current]6 KB (800 words) - 20:59, 8 July 2018
- * [https://www.youtube.com/watch?v=1-5-7Z6JzX4 Remove and re-insert Anderson pins] (unofficial guidance video) *: {{#ev:youtube|1-5-7Z6JzX4}}4 KB (589 words) - 11:25, 30 April 2019
- ...uilt station with a level-1 charging outlet when connecting both the level 1 and level 2 outlets to the same EV, but this is an EVSE implementation prob11 KB (1,688 words) - 18:25, 1 October 2018
- : [[wikipedia:8-N-1|8-N-1]] - OB Charger 1 Attached : No37 KB (4,388 words) - 10:44, 23 May 2021
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}762 bytes (100 words) - 22:08, 31 May 2020
- * "1C" refers to a current rate that would charge or discharge the battery in 1 hour if applied constantly. * "4C" refers to a current rate that would charge or discharge the battery in 1/4 hour (15 minutes) if applied constantly.559 bytes (88 words) - 21:14, 24 April 2018
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}280 bytes (34 words) - 19:23, 12 July 2018
- |rowspan="999"|1-digit calculated :13 KB (529 words) - 18:02, 8 July 2020
- ...Zero App reports itself as 1.6.50(21), but Google Play Store reports it as 1.6.50 |1.7.517 KB (2,681 words) - 20:56, 8 October 2020
- | Philips #1 Screwdriver||PH1 | Flathead Screwdriver||Size 13 KB (356 words) - 21:49, 31 March 2020
- * Size 1 flat head screwdriver # '''Pre-2015:''' Using the Size 1 flat blade screwdriver, remove the cap to expose the head of the pin.5 KB (902 words) - 02:48, 3 December 2019
- ...wired and configured to talk to two BMSs total, #0 for the Power Pack and #1 for the Power Tank. *: Power Tank logs and settings will be accessible as BMS #1.6 KB (902 words) - 06:44, 24 January 2020
- * At 1% SOC, the Eva goes into Limp mode and an icon lights up on the dash and pow ...riding with lots of track days, CSS training, some on/off minimoto racing, 1 year of AHRMA E-Moto racing, 3 years CMSP certified motorcycle instructor,14 KB (2,377 words) - 21:50, 2 August 2018
- Switch the [[Gen2/Instrument Cluster|dash]] display 1 to the error code display to see a cycling list of the 2-digit error codes |- id="1"9 KB (1,238 words) - 00:47, 1 May 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}1 KB (216 words) - 06:15, 24 January 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.5 KB (862 words) - 23:56, 29 March 2020
- |1.3 |1.016 KB (2,318 words) - 03:44, 31 March 2020
- * (1) J1772 inlet wired for 2 charging units, or 1 charging unit and a split to feed the onboard charger. ...nits, two J1772 inlets will be provided, one wired for 2 units and one for 1 unit with an onboard charger split.6 KB (1,018 words) - 02:59, 31 December 2019
- * (1) Rack steel hardware * (1) Rubber bumper4 KB (613 words) - 16:37, 6 May 2020
- |rowspan="4"|1" |rowspan="4"|1"1 KB (121 words) - 22:57, 27 June 2019
- : Steel tube of 1" outer diameter with a black finish. * (1) Crossmember piece.8 KB (1,253 words) - 23:32, 18 April 2020
- {{Special:Prefixindex/DigiNow/Super Charger V |stripprefix=1}}361 bytes (41 words) - 19:16, 12 July 2018
- #: [https://itunes.apple.com/us/app/hm10-bluetooth-serial-pro/id1221924372?ls=1&mt=8 HM10 Bluetooth Serial Pro] app for iOS For a ZF13.0 with 3.3 Power Tank and 1 DigiNow charger at 110V:9 KB (1,376 words) - 22:19, 16 January 2020
- |18 KB (1,181 words) - 17:40, 22 April 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.4 KB (684 words) - 21:33, 31 March 2020
- Image:2016_FX_Wiring_1-1-preview.png|2016 FX Wiring Diagram 1.11,013 bytes (100 words) - 17:50, 22 April 2020
- |- id="1" | rowspan="4"|[[#1|1]]6 KB (823 words) - 03:07, 6 May 2020
- ...the image.<br /><br />Vernier scale offers interpolated measurements to 0.1 mm or higher. Oddleg calipers, Hermaphrodite calipers, or Oddleg Jennys, as7 KB (1,109 words) - 05:33, 22 January 2022
- ...facebook.com/photo.php?fbid=10210641031081262&set=p.10210641031081262&type=1&theater this FB post by Paul Murray] suggests this method for dealing with :# Adjust the brake side tensioner a 1/4 turn (or less), in or out, and spin the wheel again.2 KB (351 words) - 03:11, 15 August 2018
- : '''NOTE:''' The indicator skips 81,61,41,21, and 1. #* '''Trip 1''' odometer (resets after a full charge or manually). Units are mi or km.7 KB (835 words) - 00:06, 2 May 2020
- : Neoprene at 1/16" thickness has been tested at highway speeds to make a marked difference :: A thin (3mm or 1/8") sheet above the battery would also help in cold precipitation.3 KB (548 words) - 04:06, 12 November 2019
- : Easy / less than 1 hour.2 KB (305 words) - 02:56, 31 December 2019
- # Gently but firmly re-tighten the bolts on B+ and B- to 7 Nm ± 1 Nm (6.2ft-lbs) per Sevcon (also recommended 7-12 ft-lbs).7 KB (1,009 words) - 23:49, 29 March 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.2 KB (248 words) - 02:19, 31 March 2020
- : Number of blinks (1-5) show which 20% of charge range |1.3 (3.8 or more with a tank J plug)7 KB (973 words) - 22:02, 22 January 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}917 bytes (105 words) - 20:28, 8 July 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}825 bytes (110 words) - 00:17, 22 January 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}6 KB (778 words) - 17:41, 22 April 2020
- File:2016-dsr-calex-1200-depotting-9.jpg|Carving (1) File:2016-dsr-calex-1200-depotting-1.jpg|Carving (4)3 KB (430 words) - 21:19, 12 January 2020
- Zero's effective contactor limit for the charging rate is 95% of 1[[C-Rate|C rate]]. ...ntinuously for a minute. A 1[[C-Rate|C rate]] charges the battery fully in 1 hour.7 KB (1,044 words) - 02:36, 31 December 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}660 bytes (83 words) - 17:57, 9 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}779 bytes (91 words) - 17:26, 29 March 2020
- ...ighs 23lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width. Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 1.png|Vertical Stanchion Left4 KB (619 words) - 01:41, 7 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}320 bytes (41 words) - 20:07, 30 December 2019
