Search results
Create the page "1" on this wiki! See also the search results found.
Page title matches
-
49 bytes (5 words) - 22:29, 23 January 2020
Page text matches
- :* Primarily 1/2" diameter square and circular tubing. :* The rack [https://www.happy-trail.com/Instructions/HTPZ0-1-1.1.pdf mounts to the seat bolts and peg supports] instead of the smaller holes38 KB (5,571 words) - 17:48, 18 June 2020
- The bolt/thread specification appears to be M10 with x 1.25 pitch, left-hand-threaded on the right side. ...ting them outboard of the hand guards and securing with a longer screw (M8-1.25 x 70mm, SS philips head from Home Depot will do).14 KB (2,111 words) - 21:40, 17 July 2023
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}1 KB (133 words) - 06:12, 24 January 2020
- : An effective 60mpg has been noted in one case for a full charge (1.5 gallons for a 90 mile range presumably). :* This requires attending to the bike on a (1 month, say) schedule to recharge it until cel balancing is restored fully,18 KB (2,775 words) - 18:36, 29 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}565 bytes (80 words) - 22:17, 30 March 2020
- |S ||33.1 || 841 |XU ||31.1 || 7905 KB (673 words) - 21:16, 23 June 2020
- ** [http://www.archive.org/details/NEETSModule01 Module 1, Introduction to Matter, Energy, and Direct Current]6 KB (800 words) - 20:59, 8 July 2018
- * [https://www.youtube.com/watch?v=1-5-7Z6JzX4 Remove and re-insert Anderson pins] (unofficial guidance video) *: {{#ev:youtube|1-5-7Z6JzX4}}4 KB (589 words) - 11:25, 30 April 2019
- ...uilt station with a level-1 charging outlet when connecting both the level 1 and level 2 outlets to the same EV, but this is an EVSE implementation prob11 KB (1,688 words) - 18:25, 1 October 2018
- : [[wikipedia:8-N-1|8-N-1]] - OB Charger 1 Attached : No37 KB (4,388 words) - 10:44, 23 May 2021
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}762 bytes (100 words) - 22:08, 31 May 2020
- * "1C" refers to a current rate that would charge or discharge the battery in 1 hour if applied constantly. * "4C" refers to a current rate that would charge or discharge the battery in 1/4 hour (15 minutes) if applied constantly.559 bytes (88 words) - 21:14, 24 April 2018
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}280 bytes (34 words) - 19:23, 12 July 2018
- |rowspan="999"|1-digit calculated :13 KB (529 words) - 18:02, 8 July 2020
- ...Zero App reports itself as 1.6.50(21), but Google Play Store reports it as 1.6.50 |1.7.517 KB (2,681 words) - 20:56, 8 October 2020
- | Philips #1 Screwdriver||PH1 | Flathead Screwdriver||Size 13 KB (356 words) - 21:49, 31 March 2020
- * Size 1 flat head screwdriver # '''Pre-2015:''' Using the Size 1 flat blade screwdriver, remove the cap to expose the head of the pin.5 KB (902 words) - 02:48, 3 December 2019
- ...wired and configured to talk to two BMSs total, #0 for the Power Pack and #1 for the Power Tank. *: Power Tank logs and settings will be accessible as BMS #1.6 KB (902 words) - 06:44, 24 January 2020
- * At 1% SOC, the Eva goes into Limp mode and an icon lights up on the dash and pow ...riding with lots of track days, CSS training, some on/off minimoto racing, 1 year of AHRMA E-Moto racing, 3 years CMSP certified motorcycle instructor,14 KB (2,377 words) - 21:50, 2 August 2018
- Switch the [[Gen2/Instrument Cluster|dash]] display 1 to the error code display to see a cycling list of the 2-digit error codes |- id="1"9 KB (1,238 words) - 00:47, 1 May 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}1 KB (216 words) - 06:15, 24 January 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.5 KB (862 words) - 23:56, 29 March 2020
- |1.3 |1.016 KB (2,318 words) - 03:44, 31 March 2020
- * (1) J1772 inlet wired for 2 charging units, or 1 charging unit and a split to feed the onboard charger. ...nits, two J1772 inlets will be provided, one wired for 2 units and one for 1 unit with an onboard charger split.6 KB (1,018 words) - 02:59, 31 December 2019
- * (1) Rack steel hardware * (1) Rubber bumper4 KB (613 words) - 16:37, 6 May 2020
- |rowspan="4"|1" |rowspan="4"|1"1 KB (121 words) - 22:57, 27 June 2019
- : Steel tube of 1" outer diameter with a black finish. * (1) Crossmember piece.8 KB (1,253 words) - 23:32, 18 April 2020
- {{Special:Prefixindex/DigiNow/Super Charger V |stripprefix=1}}361 bytes (41 words) - 19:16, 12 July 2018
- #: [https://itunes.apple.com/us/app/hm10-bluetooth-serial-pro/id1221924372?ls=1&mt=8 HM10 Bluetooth Serial Pro] app for iOS For a ZF13.0 with 3.3 Power Tank and 1 DigiNow charger at 110V:9 KB (1,376 words) - 22:19, 16 January 2020
- |18 KB (1,181 words) - 17:40, 22 April 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.4 KB (684 words) - 21:33, 31 March 2020
- Image:2016_FX_Wiring_1-1-preview.png|2016 FX Wiring Diagram 1.11,013 bytes (100 words) - 17:50, 22 April 2020
- |- id="1" | rowspan="4"|[[#1|1]]6 KB (823 words) - 03:07, 6 May 2020
- ...the image.<br /><br />Vernier scale offers interpolated measurements to 0.1 mm or higher. Oddleg calipers, Hermaphrodite calipers, or Oddleg Jennys, as7 KB (1,109 words) - 05:33, 22 January 2022
- ...facebook.com/photo.php?fbid=10210641031081262&set=p.10210641031081262&type=1&theater this FB post by Paul Murray] suggests this method for dealing with :# Adjust the brake side tensioner a 1/4 turn (or less), in or out, and spin the wheel again.2 KB (351 words) - 03:11, 15 August 2018
- : '''NOTE:''' The indicator skips 81,61,41,21, and 1. #* '''Trip 1''' odometer (resets after a full charge or manually). Units are mi or km.7 KB (835 words) - 00:06, 2 May 2020
- : Neoprene at 1/16" thickness has been tested at highway speeds to make a marked difference :: A thin (3mm or 1/8") sheet above the battery would also help in cold precipitation.3 KB (548 words) - 04:06, 12 November 2019
- : Easy / less than 1 hour.2 KB (305 words) - 02:56, 31 December 2019
- # Gently but firmly re-tighten the bolts on B+ and B- to 7 Nm ± 1 Nm (6.2ft-lbs) per Sevcon (also recommended 7-12 ft-lbs).7 KB (1,009 words) - 23:49, 29 March 2020
- *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.2 KB (248 words) - 02:19, 31 March 2020
- : Number of blinks (1-5) show which 20% of charge range |1.3 (3.8 or more with a tank J plug)7 KB (973 words) - 22:02, 22 January 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}917 bytes (105 words) - 20:28, 8 July 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}825 bytes (110 words) - 00:17, 22 January 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}6 KB (778 words) - 17:41, 22 April 2020
- File:2016-dsr-calex-1200-depotting-9.jpg|Carving (1) File:2016-dsr-calex-1200-depotting-1.jpg|Carving (4)3 KB (430 words) - 21:19, 12 January 2020
- Zero's effective contactor limit for the charging rate is 95% of 1[[C-Rate|C rate]]. ...ntinuously for a minute. A 1[[C-Rate|C rate]] charges the battery fully in 1 hour.7 KB (1,044 words) - 02:36, 31 December 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}660 bytes (83 words) - 17:57, 9 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}779 bytes (91 words) - 17:26, 29 March 2020
- ...ighs 23lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width. Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 1.png|Vertical Stanchion Left4 KB (619 words) - 01:41, 7 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}320 bytes (41 words) - 20:07, 30 December 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen3/ |stripprefix=1}}339 bytes (34 words) - 00:30, 21 February 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/FST Platform/ |stripprefix=1}}614 bytes (78 words) - 05:35, 21 February 2020
- * The dealer charges over $1,500 to replace these motors when most of the time it's as simple as bad bea5 KB (909 words) - 23:22, 12 July 2020
- ! style="background-color: yellow;" |Stage 1362 bytes (36 words) - 23:59, 27 June 2019
- ! style="background-color: yellow;" |Stage 1358 bytes (36 words) - 00:01, 28 June 2019
- # screwdriver/awl/something to poke 1/4" holes # double-sided tape (recommend Scotch Outdoor Mounting Tape, 1" wide)2 KB (278 words) - 05:18, 13 January 2020
- * 1 adapter plate * 1 thin cover for the adapter plate2 KB (379 words) - 02:54, 31 December 2019
- ...hock mounting bolt is a 15 and 17 mm and can be done with ratchet wrenches 1/32 of a turn at a time, or without ratchet wrenches if you are known to hav4 KB (715 words) - 03:24, 18 November 2019
- Generation 1 or "{{FULLPAGENAME}}" refers to Zero motorcycles made from 2006-2012, wheth {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}859 bytes (121 words) - 21:16, 14 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}516 bytes (71 words) - 19:25, 9 July 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}752 bytes (102 words) - 00:33, 21 February 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}913 bytes (103 words) - 20:13, 30 December 2019
- ...ighs 20lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width.2 KB (292 words) - 22:39, 17 January 2022
- * 1 1/8" (28mm) ⌀ center bar. * (1) 3/16" ⌀ on the left for the switchgear, 6.5" from the end of the bar.2 KB (279 words) - 02:19, 14 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}3 KB (475 words) - 01:50, 7 April 2020
- : [[File:ZeroWireDrawing_2013_S_11-4_R-1-3-0_no-grid_highRes-scaled.png|400px|thumb|none|2013S wiring diagram previe : [[:File:ZeroWireDrawing_2013_S_11-4_R-1-3-0_grid_highRes.pdf|1.3.0 Gridded PDF]]976 bytes (135 words) - 22:42, 15 April 2020
- : [[:File:2016_FX_Wiring_1-1.pdf| 1.1 PDF]] |[[File:2016_FX_Wiring_1-1-preview.png|400px|link=2016 X-Platform Wiring Diagram|2016 FX wiring diagra818 bytes (104 words) - 00:01, 19 April 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}1 KB (160 words) - 21:17, 23 June 2020
- ...ad doesn't impact range much (110Wh over 2 hours compared to 11+kWh yields 1% range difference), ''unless'' you ride a very slow long travel leg for, sa2 KB (312 words) - 04:48, 12 March 2022
- ...com/molex/products/datasheet.jsp?part=active/0003061011_CRIMP_HOUSINGS.xml 1 Pin Molex .062 Female Plug Connector w/Pins 03-06-1011] ...com/molex/products/datasheet.jsp?part=active/0003062011_CRIMP_HOUSINGS.xml 1 Pin Molex .062 Male Plug Connector w/Pins 03-06-2011]2 KB (229 words) - 01:02, 4 December 2019
- 10+10W+1,2W2 KB (330 words) - 02:35, 8 February 2022
- {{Special:PrefixIndex/Gen2/Calex Charger/|stripprefix=1}}2 KB (288 words) - 19:16, 30 April 2020
- |rowspan="99"|11.9:1 ...er - like the Nissin 3/8 I put on my 'MX' bike - would give the SR a 21.1:1 ratio, or @ 78% more pad pressure than the OEM 12.7mm master cylinder.1 KB (162 words) - 22:23, 3 December 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}3 KB (350 words) - 22:53, 3 December 2019
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}3 KB (475 words) - 00:19, 30 March 2020
- |34-pin connector "MBB 1" [[File:mbb-1-connector.png|thumb|2013 MBB 1 connector Wiring Diagram image]]2 KB (241 words) - 21:48, 22 April 2020
- |[[File:DC-DC Sevcon 500W Converter - 1.png|thumb|500W Sevcon DC-DC converter - top]] |rowspan="2"|17 KB (1,010 words) - 17:49, 22 April 2020
- |1 |12 KB (306 words) - 03:08, 31 December 2019
- :: 88 volts is about 3.14V per cell and there is less than 1% energy left at 3.14V.4 KB (565 words) - 22:06, 30 March 2020
- | Koyo SAC3055-11 KB (130 words) - 16:55, 8 April 2020
- .../resources/owners-manuals/2010/2010-Zero-Owners-Manual-S-DS.pdf 2010 S,DS] 1-11.A ...resources/owners-manuals/2010/2010-Zero-Owners-Manual-X-MX.pdf 2010 X,MX] 1-10.A, 4-17.A22 KB (2,780 words) - 20:16, 4 December 2019
- ...accommodates/mounts a [[CHAdeMO]] charging inlet (and can adapt to a Type 1 or Type 2 J1772 inlet with some fabrication).3 KB (387 words) - 16:08, 26 May 2020
- : 15" tall × 9 3/4" wide × 6 1/2" deep. ...n it with the contactor and bms inside that add about 2" to the height and 1" to the depth for about half of the height of the battery.2 KB (315 words) - 19:42, 17 June 2020
- |1 module |1-2 removable [[Power Pack Module|modules]]3 KB (357 words) - 00:42, 20 April 2020
- ...ps://www.ebay.com/itm/Large-19x17-Clear-Windcreen-Universal-Motorcycle-7-8-1-Handlebar-Windshield/184023487813/ Chinese LARGE Windscreen from eBay]=== ...ay.com/itm/Large-19-x17-Clear-Windshield-For-Motorcycle-Yamaha-Cruiser-7-8-1-Handlebars/231923751389?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D22204 KB (573 words) - 02:24, 18 May 2020
- ! Current Limit 1 Hour Rating835 bytes (105 words) - 18:57, 9 July 2020
- *: You only need 1-2mm1 KB (158 words) - 04:40, 21 April 2020
- : Expect several degrees Fahrenheit rise when performing a full charge near a 1[[C-Rate|C rate]].1 KB (198 words) - 23:26, 3 January 2020
- * Torque Wrench (ideally 3/8" and 1/2" drives) # Loosen the brake rotor bolts about 1/4" and slide the brake caliper on the rotor.5 KB (805 words) - 01:02, 12 January 2020
- ...info&products_id=190.php.html ZF2.8] will require multiplying this rate by 1.17. |0.20C||15 KB (738 words) - 20:52, 5 August 2021
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}927 bytes (131 words) - 00:03, 17 January 2020
- | [http://www.te.com/usa-en/product-1-776163-1.html Connector info] (see AMPSEAL Automotive Plug Connector and Header Asse :* Pin 1 is "Key Switch In": power for the logic circuits.2 KB (241 words) - 00:09, 17 January 2020
- ...k (2013-2014), which would mean a full charge in an hour, referred to as a 1[[C-Rate|C rate]].1 KB (183 words) - 00:59, 17 January 2020
- | This is a data logging record, taken every 1 minute by default. |BMS 1 Internal Disable Received5 KB (670 words) - 02:55, 6 May 2020
- ...ebar-clamps-black/ Cycra Black Anodized Handguard CRM Clamp Set Oversize 1-1/8 Bars]8 KB (1,150 words) - 06:42, 22 January 2020
- ...to charging standard [[wikipedia:SAE J1772|SAE J1772]], also known as Type 1 to the IEC, or "J plug". : It is commonly used for single-phase AC level 1 and level 2 charging.744 bytes (97 words) - 21:28, 22 January 2020
- {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/FST Platform/ |stripprefix=1}}737 bytes (100 words) - 05:36, 21 February 2020
- #: Check voltage between (+) pin 1 and (-) pin 3. #: Connect pin 1 directly to pin 2 using a piece of cable.3 KB (403 words) - 05:52, 19 February 2020
- #* 1 on the left for the switchgear 3/16”, 6.5” from the end of the bar. #* 1 on the right inner for the throttle 3/16”, 7 3/16” from the bar end.2 KB (291 words) - 02:32, 14 April 2020
- | rowspan="2" | 1 | 1,2,4,122 KB (256 words) - 23:26, 26 April 2020
