Search results

Jump to: navigation, search

Page title matches

  • 49 bytes (5 words) - 22:29, 23 January 2020

Page text matches

  • :* Primarily 1/2" diameter square and circular tubing. :* The rack [https://www.happy-trail.com/Instructions/HTPZ0-1-1.1.pdf mounts to the seat bolts and peg supports] instead of the smaller holes
    38 KB (5,571 words) - 17:48, 18 June 2020
  • The bolt/thread specification appears to be M10 with x 1.25 pitch, left-hand-threaded on the right side. ...ting them outboard of the hand guards and securing with a longer screw (M8-1.25 x 70mm, SS philips head from Home Depot will do).
    14 KB (2,111 words) - 21:40, 17 July 2023
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    1 KB (133 words) - 06:12, 24 January 2020
  • : An effective 60mpg has been noted in one case for a full charge (1.5 gallons for a 90 mile range presumably). :* This requires attending to the bike on a (1 month, say) schedule to recharge it until cel balancing is restored fully,
    18 KB (2,775 words) - 18:36, 29 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    565 bytes (80 words) - 22:17, 30 March 2020
  • |S ||33.1 || 841 |XU ||31.1 || 790
    5 KB (673 words) - 21:16, 23 June 2020
  • ** [http://www.archive.org/details/NEETSModule01 Module 1, Introduction to Matter, Energy, and Direct Current]
    6 KB (800 words) - 20:59, 8 July 2018
  • * [https://www.youtube.com/watch?v=1-5-7Z6JzX4 Remove and re-insert Anderson pins] (unofficial guidance video) *: {{#ev:youtube|1-5-7Z6JzX4}}
    4 KB (589 words) - 11:25, 30 April 2019
  • ...uilt station with a level-1 charging outlet when connecting both the level 1 and level 2 outlets to the same EV, but this is an EVSE implementation prob
    11 KB (1,688 words) - 18:25, 1 October 2018
  • : [[wikipedia:8-N-1|8-N-1]] - OB Charger 1 Attached : No
    37 KB (4,388 words) - 10:44, 23 May 2021
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    762 bytes (100 words) - 22:08, 31 May 2020
  • * "1C" refers to a current rate that would charge or discharge the battery in 1 hour if applied constantly. * "4C" refers to a current rate that would charge or discharge the battery in 1/4 hour (15 minutes) if applied constantly.
    559 bytes (88 words) - 21:14, 24 April 2018
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    280 bytes (34 words) - 19:23, 12 July 2018
  • |rowspan="999"|1-digit calculated :1
    3 KB (529 words) - 18:02, 8 July 2020
  • ...Zero App reports itself as 1.6.50(21), but Google Play Store reports it as 1.6.50 |1.7.5
    17 KB (2,681 words) - 20:56, 8 October 2020
  • | Philips #1 Screwdriver||PH1 | Flathead Screwdriver||Size 1
    3 KB (356 words) - 21:49, 31 March 2020
  • * Size 1 flat head screwdriver # '''Pre-2015:''' Using the Size 1 flat blade screwdriver, remove the cap to expose the head of the pin.
    5 KB (902 words) - 02:48, 3 December 2019
  • ...wired and configured to talk to two BMSs total, #0 for the Power Pack and #1 for the Power Tank. *: Power Tank logs and settings will be accessible as BMS #1.
    6 KB (902 words) - 06:44, 24 January 2020
  • * At 1% SOC, the Eva goes into Limp mode and an icon lights up on the dash and pow ...riding with lots of track days, CSS training, some on/off minimoto racing, 1 year of AHRMA E-Moto racing, 3 years CMSP certified motorcycle instructor,
    14 KB (2,377 words) - 21:50, 2 August 2018
  • Switch the [[Gen2/Instrument Cluster|dash]] display 1 to the error code display to see a cycling list of the 2-digit error codes |- id="1"
    9 KB (1,238 words) - 00:47, 1 May 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    1 KB (216 words) - 06:15, 24 January 2020
  • *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.
    5 KB (862 words) - 23:56, 29 March 2020
  • |1.3 |1.0
    16 KB (2,318 words) - 03:44, 31 March 2020
  • * (1) J1772 inlet wired for 2 charging units, or 1 charging unit and a split to feed the onboard charger. ...nits, two J1772 inlets will be provided, one wired for 2 units and one for 1 unit with an onboard charger split.
    6 KB (1,018 words) - 02:59, 31 December 2019
  • * (1) Rack steel hardware * (1) Rubber bumper
    4 KB (613 words) - 16:37, 6 May 2020
  • |rowspan="4"|1" |rowspan="4"|1"
    1 KB (121 words) - 22:57, 27 June 2019
  • : Steel tube of 1" outer diameter with a black finish. * (1) Crossmember piece.
    8 KB (1,253 words) - 23:32, 18 April 2020
  • {{Special:Prefixindex/DigiNow/Super Charger V |stripprefix=1}}
    361 bytes (41 words) - 19:16, 12 July 2018
  • #: [https://itunes.apple.com/us/app/hm10-bluetooth-serial-pro/id1221924372?ls=1&mt=8 HM10 Bluetooth Serial Pro] app for iOS For a ZF13.0 with 3.3 Power Tank and 1 DigiNow charger at 110V:
    9 KB (1,376 words) - 22:19, 16 January 2020
  • |1
    8 KB (1,181 words) - 17:40, 22 April 2020
  • *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.
    4 KB (684 words) - 21:33, 31 March 2020
  • Image:2016_FX_Wiring_1-1-preview.png|2016 FX Wiring Diagram 1.1
    1,013 bytes (100 words) - 17:50, 22 April 2020
  • |- id="1" | rowspan="4"|[[#1|1]]
    6 KB (823 words) - 03:07, 6 May 2020
  • ...the image.<br /><br />Vernier scale offers interpolated measurements to 0.1 mm or higher. Oddleg calipers, Hermaphrodite calipers, or Oddleg Jennys, as
    7 KB (1,109 words) - 05:33, 22 January 2022
  • ...facebook.com/photo.php?fbid=10210641031081262&set=p.10210641031081262&type=1&theater this FB post by Paul Murray] suggests this method for dealing with :# Adjust the brake side tensioner a 1/4 turn (or less), in or out, and spin the wheel again.
    2 KB (351 words) - 03:11, 15 August 2018
  • : '''NOTE:''' The indicator skips 81,61,41,21, and 1. #* '''Trip 1''' odometer (resets after a full charge or manually). Units are mi or km.
    7 KB (835 words) - 00:06, 2 May 2020
  • : Neoprene at 1/16" thickness has been tested at highway speeds to make a marked difference :: A thin (3mm or 1/8") sheet above the battery would also help in cold precipitation.
    3 KB (548 words) - 04:06, 12 November 2019
  • : Easy / less than 1 hour.
    2 KB (305 words) - 02:56, 31 December 2019
  • # Gently but firmly re-tighten the bolts on B+ and B- to 7 Nm ± 1 Nm (6.2ft-lbs) per Sevcon (also recommended 7-12 ft-lbs).
    7 KB (1,009 words) - 23:49, 29 March 2020
  • *: Ensure at least 1" depth and a ⅜" drive sufficient to handle swingarm pivot bolt torques.
    2 KB (248 words) - 02:19, 31 March 2020
  • : Number of blinks (1-5) show which 20% of charge range |1.3 (3.8 or more with a tank J plug)
    7 KB (973 words) - 22:02, 22 January 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    917 bytes (105 words) - 20:28, 8 July 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    825 bytes (110 words) - 00:17, 22 January 2019
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    6 KB (778 words) - 17:41, 22 April 2020
  • File:2016-dsr-calex-1200-depotting-9.jpg|Carving (1) File:2016-dsr-calex-1200-depotting-1.jpg|Carving (4)
    3 KB (430 words) - 21:19, 12 January 2020
  • Zero's effective contactor limit for the charging rate is 95% of 1[[C-Rate|C rate]]. ...ntinuously for a minute. A 1[[C-Rate|C rate]] charges the battery fully in 1 hour.
    7 KB (1,044 words) - 02:36, 31 December 2019
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}
    660 bytes (83 words) - 17:57, 9 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen2/ |stripprefix=1}}
    779 bytes (91 words) - 17:26, 29 March 2020
  • ...ighs 23lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width. Image:2017-S-Frame - Vertical Stanchion Left Inside Plug 1.png|Vertical Stanchion Left
    4 KB (619 words) - 01:41, 7 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    320 bytes (41 words) - 20:07, 30 December 2019
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/Gen3/ |stripprefix=1}}
    339 bytes (34 words) - 00:30, 21 February 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/FST Platform/ |stripprefix=1}}
    614 bytes (78 words) - 05:35, 21 February 2020
  • * The dealer charges over $1,500 to replace these motors when most of the time it's as simple as bad bea
    5 KB (909 words) - 23:22, 12 July 2020
  • ! style="background-color: yellow;" |Stage 1
    362 bytes (36 words) - 23:59, 27 June 2019
  • ! style="background-color: yellow;" |Stage 1
    358 bytes (36 words) - 00:01, 28 June 2019
  • # screwdriver/awl/something to poke 1/4" holes # double-sided tape (recommend Scotch Outdoor Mounting Tape, 1" wide)
    2 KB (278 words) - 05:18, 13 January 2020
  • * 1 adapter plate * 1 thin cover for the adapter plate
    2 KB (379 words) - 02:54, 31 December 2019
  • ...hock mounting bolt is a 15 and 17 mm and can be done with ratchet wrenches 1/32 of a turn at a time, or without ratchet wrenches if you are known to hav
    4 KB (715 words) - 03:24, 18 November 2019
  • Generation 1 or "{{FULLPAGENAME}}" refers to Zero motorcycles made from 2006-2012, wheth {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    859 bytes (121 words) - 21:16, 14 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    516 bytes (71 words) - 19:25, 9 July 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    752 bytes (102 words) - 00:33, 21 February 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    913 bytes (103 words) - 20:13, 30 December 2019
  • ...ighs 20lbs, and is a combination of cast parts and welded square tubing of 1-inch outer width.
    2 KB (292 words) - 22:39, 17 January 2022
  • * 1 1/8" (28mm) ⌀ center bar. * (1) 3/16" ⌀ on the left for the switchgear, 6.5" from the end of the bar.
    2 KB (279 words) - 02:19, 14 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    3 KB (475 words) - 01:50, 7 April 2020
  • : [[File:ZeroWireDrawing_2013_S_11-4_R-1-3-0_no-grid_highRes-scaled.png|400px|thumb|none|2013S wiring diagram previe : [[:File:ZeroWireDrawing_2013_S_11-4_R-1-3-0_grid_highRes.pdf|1.3.0 Gridded PDF]]
    976 bytes (135 words) - 22:42, 15 April 2020
  • : [[:File:2016_FX_Wiring_1-1.pdf| 1.1 PDF]] |[[File:2016_FX_Wiring_1-1-preview.png|400px|link=2016 X-Platform Wiring Diagram|2016 FX wiring diagra
    818 bytes (104 words) - 00:01, 19 April 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    1 KB (160 words) - 21:17, 23 June 2020
  • ...ad doesn't impact range much (110Wh over 2 hours compared to 11+kWh yields 1% range difference), ''unless'' you ride a very slow long travel leg for, sa
    2 KB (312 words) - 04:48, 12 March 2022
  • ...com/molex/products/datasheet.jsp?part=active/0003061011_CRIMP_HOUSINGS.xml 1 Pin Molex .062 Female Plug Connector w/Pins 03-06-1011] ...com/molex/products/datasheet.jsp?part=active/0003062011_CRIMP_HOUSINGS.xml 1 Pin Molex .062 Male Plug Connector w/Pins 03-06-2011]
    2 KB (229 words) - 01:02, 4 December 2019
  • 10+10W+1,2W
    2 KB (330 words) - 02:35, 8 February 2022
  • {{Special:PrefixIndex/Gen2/Calex Charger/|stripprefix=1}}
    2 KB (288 words) - 19:16, 30 April 2020
  • |rowspan="99"|11.9:1 ...er - like the Nissin 3/8 I put on my 'MX' bike - would give the SR a 21.1:1 ratio, or @ 78% more pad pressure than the OEM 12.7mm master cylinder.
    1 KB (162 words) - 22:23, 3 December 2019
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    3 KB (350 words) - 22:53, 3 December 2019
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |hideredirects=1 |stripprefix=1}}
    3 KB (475 words) - 00:19, 30 March 2020
  • |34-pin connector "MBB 1" [[File:mbb-1-connector.png|thumb|2013 MBB 1 connector Wiring Diagram image]]
    2 KB (241 words) - 21:48, 22 April 2020
  • |[[File:DC-DC Sevcon 500W Converter - 1.png|thumb|500W Sevcon DC-DC converter - top]] |rowspan="2"|1
    7 KB (1,010 words) - 17:49, 22 April 2020
  • |1 |1
    2 KB (306 words) - 03:08, 31 December 2019
  • :: 88 volts is about 3.14V per cell and there is less than 1% energy left at 3.14V.
    4 KB (565 words) - 22:06, 30 March 2020
  • | Koyo SAC3055-1
    1 KB (130 words) - 16:55, 8 April 2020
  • .../resources/owners-manuals/2010/2010-Zero-Owners-Manual-S-DS.pdf 2010 S,DS] 1-11.A ...resources/owners-manuals/2010/2010-Zero-Owners-Manual-X-MX.pdf 2010 X,MX] 1-10.A, 4-17.A
    22 KB (2,780 words) - 20:16, 4 December 2019
  • ...accommodates/mounts a [[CHAdeMO]] charging inlet (and can adapt to a Type 1 or Type 2 J1772 inlet with some fabrication).
    3 KB (387 words) - 16:08, 26 May 2020
  • : 15" tall &times; 9 3/4" wide &times; 6 1/2" deep. ...n it with the contactor and bms inside that add about 2" to the height and 1" to the depth for about half of the height of the battery.
    2 KB (315 words) - 19:42, 17 June 2020
  • |1 module |1-2 removable [[Power Pack Module|modules]]
    3 KB (357 words) - 00:42, 20 April 2020
  • ...ps://www.ebay.com/itm/Large-19x17-Clear-Windcreen-Universal-Motorcycle-7-8-1-Handlebar-Windshield/184023487813/ Chinese LARGE Windscreen from eBay]=== ...ay.com/itm/Large-19-x17-Clear-Windshield-For-Motorcycle-Yamaha-Cruiser-7-8-1-Handlebars/231923751389?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D2220
    4 KB (573 words) - 02:24, 18 May 2020
  • ! Current Limit 1 Hour Rating
    835 bytes (105 words) - 18:57, 9 July 2020
  • *: You only need 1-2mm
    1 KB (158 words) - 04:40, 21 April 2020
  • : Expect several degrees Fahrenheit rise when performing a full charge near a 1[[C-Rate|C rate]].
    1 KB (198 words) - 23:26, 3 January 2020
  • * Torque Wrench (ideally 3/8" and 1/2" drives) # Loosen the brake rotor bolts about 1/4" and slide the brake caliper on the rotor.
    5 KB (805 words) - 01:02, 12 January 2020
  • ...info&products_id=190.php.html ZF2.8] will require multiplying this rate by 1.17. |0.20C||1
    5 KB (738 words) - 20:52, 5 August 2021
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}}
    927 bytes (131 words) - 00:03, 17 January 2020
  • | [http://www.te.com/usa-en/product-1-776163-1.html Connector info] (see AMPSEAL Automotive Plug Connector and Header Asse :* Pin 1 is "Key Switch In": power for the logic circuits.
    2 KB (241 words) - 00:09, 17 January 2020
  • ...k (2013-2014), which would mean a full charge in an hour, referred to as a 1[[C-Rate|C rate]].
    1 KB (183 words) - 00:59, 17 January 2020
  • | This is a data logging record, taken every 1 minute by default. |BMS 1 Internal Disable Received
    5 KB (670 words) - 02:55, 6 May 2020
  • ...ebar-clamps-black/ Cycra Black Anodized Handguard CRM Clamp Set Oversize 1-1/8 Bars]
    8 KB (1,150 words) - 06:42, 22 January 2020
  • ...to charging standard [[wikipedia:SAE J1772|SAE J1772]], also known as Type 1 to the IEC, or "J plug". : It is commonly used for single-phase AC level 1 and level 2 charging.
    744 bytes (97 words) - 21:28, 22 January 2020
  • {{Special:PrefixIndex/{{FULLPAGENAME}}/ |stripprefix=1}} {{Special:PrefixIndex/FST Platform/ |stripprefix=1}}
    737 bytes (100 words) - 05:36, 21 February 2020
  • #: Check voltage between (+) pin 1 and (-) pin 3. #: Connect pin 1 directly to pin 2 using a piece of cable.
    3 KB (403 words) - 05:52, 19 February 2020
  • #* 1 on the left for the switchgear 3/16”, 6.5” from the end of the bar. #* 1 on the right inner for the throttle 3/16”, 7 3/16” from the bar end.
    2 KB (291 words) - 02:32, 14 April 2020
  • | rowspan="2" | 1 | 1,2,4,12
    2 KB (256 words) - 23:26, 26 April 2020
  • | rowspan="23" | 1 | S/DS/SR BATTERY CASE FRONT 1
    8 KB (1,230 words) - 23:28, 26 April 2020
  • | rowspan="7" | 1 | CONNECTOR STRAIN RELIEF CLAMP BOTTOM 1/0 SB SMART
    2 KB (256 words) - 23:28, 26 April 2020
  • | rowspan="2" | 1 | rowspan="3" | 1,2
    3 KB (374 words) - 23:29, 26 April 2020
  • | rowspan="5" | 1 | <span id="90-02545-1">90-02545-1</span>
    3 KB (372 words) - 23:28, 26 April 2020
  • | rowspan="2" | Option #1: BLACK | NOTE: Plastic tank assembly used with the Zero SR includes 24-08206-1 Zero logo and SR letters. Includes cut out area for tank bag.
    23 KB (3,384 words) - 23:28, 26 April 2020
  • | rowspan="22" | 1 | rowspan="27" | 1
    9 KB (1,386 words) - 23:29, 26 April 2020
  • | 1 ...90-08027">90-08027</span> || Bolt || GROMMET VIBRATION ISOLATION M6 || || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM90-08027]
    819 bytes (104 words) - 23:29, 26 April 2020
  • | 1 | 1,2
    1 KB (157 words) - 23:37, 26 April 2020
  • | rowspan="6" | 1 ...n> || || SDS LONGBRICK STORAGE DOOR REPLACEMENT KIT 1 || || Body Trim || [https://www.af1racing.com/store/Scripts/prodView.asp?s
    2 KB (326 words) - 23:29, 26 April 2020
  • | 1 ...pan id="25-08080">25-08080</span> || Magnet Ring || ABS MAGNET RING || || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM25-08080]
    1,021 bytes (134 words) - 23:30, 26 April 2020
  • | <span id="23-03929-1">23-03929-1</span> | rowspan="17" | 1
    4 KB (640 words) - 23:30, 26 April 2020
  • | WASHER ISO 7093-1 6-200 HV ZM-F-01 REV 02 | 1,2,10
    1 KB (194 words) - 23:31, 26 April 2020
  • | 1 ...| BEARING LIP SEAL OVERMOLDED 55MM OD || NOTE: Supersedes part 20-06113 || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM81-08045]
    872 bytes (108 words) - 23:31, 26 April 2020
  • | rowspan="23" | 1
    5 KB (675 words) - 23:30, 26 April 2020
  • | rowspan="11" | 1 | M6 - 1.00 X 10MM
    3 KB (352 words) - 23:31, 26 April 2020
  • | rowspan="9" | 1 ...0-08005</span> || Bolt || SEAT BOLT M8X55 || NOTE: Supersedes 90-07009. || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM90-08005]
    9 KB (1,280 words) - 23:31, 26 April 2020
  • | 1,2 | rowspan="4" | 1
    3 KB (382 words) - 23:36, 26 April 2020
  • | 1,2 ...-02100</span> || Washer || WASHER ISO 7089 10-200 HV ZM-F-01 REV 02 || || 1,3 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM90-02100]
    880 bytes (108 words) - 23:32, 26 April 2020
  • | <span id="21-06708-1">21-06708-1</span> | rowspan="6" | 1
    2 KB (244 words) - 23:32, 26 April 2020
  • | rowspan="23" | 1 ...n> || Plate || LONG BRICK STORAGE BOX STRIKER PLATE 1 || || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM26-08173
    5 KB (802 words) - 23:32, 26 April 2020
  • | rowspan="4" | 1 | 1,2,4,8
    3 KB (379 words) - 23:32, 26 April 2020
  • | MOTOR SHAFT SPACER 1.5 MM FOR 1" SHAFT
    2 KB (310 words) - 04:06, 24 April 2020
  • | 1,4 ...1 REV 03 ZM-L-01 REV 01 || NOTE: THIN HEAD CAP SCREW DIN 7984 M8X30-8.8 || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM90-07289]
    1 KB (141 words) - 23:33, 26 April 2020
  • ...CLASS 10.9 ZM-F-01 REV 04 ZM-L-02 REV 01 || || Motor and Drive System || 1,4,5 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM90-08053
    696 bytes (88 words) - 23:38, 26 April 2020
  • | SPROCKET FRONT, BELT DRIVE 28T, 8MM PITCH, 15MM WIDE 1" BORE | rowspan="7" | 1
    2 KB (282 words) - 23:33, 26 April 2020
  • | WASHER UNIVERSAL (SIZE 1) 10 | 1,2,4,8,10
    899 bytes (104 words) - 23:34, 26 April 2020
  • | rowspan="2" | 1 | 1,2
    7 KB (963 words) - 23:33, 26 April 2020
  • ...-DC Converter || DC-DC CONV SEVCON 622-11202 NON-EMC || || Electronics || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM60-04015]
    668 bytes (82 words) - 23:34, 26 April 2020
  • | rowspan="3" | 1
    1 KB (172 words) - 02:46, 27 April 2020
  • | <span id="46-08002-1">46-08002-1</span> | rowspan="11" | 1
    4 KB (506 words) - 23:34, 26 April 2020
  • | rowspan="5" | 1 | rowspan="3" | 1
    3 KB (382 words) - 23:35, 26 April 2020
  • | rowspan="13" | 1 | 1,3
    5 KB (777 words) - 23:35, 26 April 2020
  • | rowspan="12" | 1 | rowspan="2" | 1,2
    7 KB (972 words) - 23:35, 26 April 2020
  • | rowspan="22" | 1 ...| || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM24-03873-1]
    4 KB (651 words) - 23:35, 26 April 2020
  • | rowspan="21" | 1 | HEX HEAD SCREW M8-1.25 X 35MM
    9 KB (1,319 words) - 23:35, 26 April 2020
  • | rowspan="4" | 1 | rowspan="13" | 1
    7 KB (970 words) - 23:35, 26 April 2020
  • | rowspan="3" | 1
    1 KB (176 words) - 23:36, 26 April 2020
  • | rowspan="15" | 1
    3 KB (481 words) - 23:36, 26 April 2020
  • | 1,4 |<span id="PA-73">PA-73</span> || Bolt || AXLE END CAP BOLT M8 - 1.25 X 20MM || || || [https://www.af1racing.com/store/Scripts/prodView.asp?
    1 KB (156 words) - 23:36, 26 April 2020
  • | rowspan="3" | 1 | 1,4
    2 KB (336 words) - 23:36, 26 April 2020
  • | <span id="21-05849-1">21-05849-1</span> | 21-05849-1 X SWINGARM
    905 bytes (111 words) - 23:36, 26 April 2020
  • | 1
    682 bytes (86 words) - 23:37, 26 April 2020
  • | SPROCKET FRONT, BELT DRIVE 25T, 8MM PITCH, 15MM WIDE 1 | rowspan="4" | 1
    1 KB (177 words) - 23:37, 26 April 2020
  • | rowspan="4" | 1 | 1,5
    6 KB (901 words) - 23:37, 26 April 2020
  • | rowspan="9" | 1
    4 KB (608 words) - 23:37, 26 April 2020
  • | rowspan="3" | 1
    1 KB (157 words) - 23:37, 26 April 2020
  • | rowspan="2" | 1
    1,018 bytes (134 words) - 23:38, 26 April 2020
  • | 1,2
    673 bytes (84 words) - 23:39, 26 April 2020
  • | rowspan="3" | 1
    1 KB (151 words) - 23:38, 26 April 2020
  • | rowspan="2" | 1
    890 bytes (113 words) - 23:38, 26 April 2020
  • | rowspan="2" | 1,2
    944 bytes (119 words) - 23:39, 26 April 2020
  • | rowspan="6" | 1
    2 KB (202 words) - 23:39, 26 April 2020
  • | rowspan="8" | 1 ...|| Bearing Spacer || BEARING SPACER TUBE 5.50 X 17 REAR CAST WHEEL || || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM23-08116]
    5 KB (748 words) - 23:40, 26 April 2020
  • | rowspan="9" | 1 | rowspan="2" | 1
    7 KB (1,001 words) - 23:40, 26 April 2020
  • | rowspan="48" | 1
    9 KB (1,272 words) - 23:40, 26 April 2020
  • ...|| REFELECTOR OVAL ADH BACK FORK MOUNT AMBER || || Suspension (Front) || 1,2 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM20-03128] ...0-08315</span> || Spring || SIDESTAND SPRING SLEEVE || || Frame (Left) || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM20-08315]
    1 KB (184 words) - 23:40, 26 April 2020
  • ...an> || Shim || SWINGARM JOINT SHIM SERVICE KIT || || Suspension (Rear) || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM12-08106]
    641 bytes (79 words) - 23:40, 26 April 2020
  • | rowspan="6" | 1
    2 KB (237 words) - 23:40, 26 April 2020
  • | rowspan="5" | 1 | 1,6,10
    5 KB (718 words) - 23:41, 26 April 2020
  • | rowspan="7" | 1
    2 KB (270 words) - 23:41, 26 April 2020
  • | rowspan="9" | 1 | rowspan="6" | 1
    7 KB (998 words) - 23:41, 26 April 2020
  • | rowspan="7" | 1
    2 KB (238 words) - 23:41, 26 April 2020
  • | rowspan="9" | 1 | 1
    4 KB (633 words) - 23:41, 26 April 2020
  • | rowspan="3" | 1
    1 KB (152 words) - 23:41, 26 April 2020
  • | rowspan="6" | 1 | <span id="20-01758-1">20-01758-1</span>
    5 KB (736 words) - 23:28, 26 April 2020
  • | rowspan="2" | 1 | 1,2
    2 KB (265 words) - 23:28, 26 April 2020
  • | rowspan="6" | 1 | rowspan="10" | 1
    14 KB (2,015 words) - 23:29, 26 April 2020
  • | rowspan="8" | 1 .../span> || Horn || DISC HORN K70/H12 V WITH BLACK ZINC 1 || || Electronics || [https://www.af1racing.com/store/Scripts/prodView.asp
    2 KB (343 words) - 23:29, 26 April 2020
  • | 1 | rowspan="6" | 1
    3 KB (467 words) - 23:30, 26 April 2020
  • | rowspan="3" | 1 | 1,6
    3 KB (412 words) - 23:30, 26 April 2020
  • | rowspan="7" | 1 ...<span id="22-06279">22-06279</span> || Nut || STEERING STEM THIN NUT M27 X 1.5 X 8MM || || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM
    2 KB (240 words) - 23:30, 26 April 2020
  • | rowspan="14" | 1 | DS/X/MX FRONT FENDER XMX BLACK#1 24-04437-2
    3 KB (476 words) - 23:31, 26 April 2020
  • | rowspan="2" | 1 | 1,4
    1 KB (202 words) - 23:31, 26 April 2020
  • | 1 | rowspan="3" | 1,2
    1 KB (172 words) - 23:32, 26 April 2020
  • | rowspan="3" | 1 | 1,2
    4 KB (614 words) - 02:46, 27 April 2020
  • | rowspan="9" | 1 | MOTOR SHAFT SPACER 1.5 MM FOR 1" SHAFT
    2 KB (341 words) - 23:33, 26 April 2020
  • | 1 | 1,4
    2 KB (323 words) - 23:33, 26 April 2020
  • | rowspan="8" | 1 | <span id="90-02054-1">90-02054-1</span>
    4 KB (556 words) - 23:33, 26 April 2020
  • | rowspan="4" | 1
    1 KB (182 words) - 23:34, 26 April 2020
  • ...RY 1 SERIAL # FOR PROGRAMMING PURPOSES || Electronics || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM41-06419-08]
    700 bytes (92 words) - 02:46, 27 April 2020
  • | rowspan="4" | 1
    1 KB (191 words) - 02:47, 27 April 2020
  • | rowspan="3" | 1
    1 KB (168 words) - 02:47, 27 April 2020
  • | rowspan="6" | 1
    2 KB (228 words) - 02:47, 27 April 2020
  • ...al || SHOWA FORK SEAL KIT || NOTE: Kit for one fork || Steering Systems || 1 || [https://www.af1racing.com/store/Scripts/prodView.asp?sku=ZM12-08037]
    639 bytes (82 words) - 23:39, 26 April 2020
  • * [[SDS Platform/Bodywork Parts#15|(15) Option #1: BLACK]] * [[Gen2/Brakes/Parts#90-08029|(90-08029) HEXAGON HEAD SCREW ISO 4762 M10-1.25X40-10.9 ZM-F-01 REV03 ZM-L-01 REV01]]
    43 KB (5,870 words) - 06:07, 27 April 2020
  • ...orm/Bodywork Parts#24-05328-1|(24-05328-1) DS TANK ASSEMBLY BLACK 24-05328-1 NOTE: DS Tank Assembly no longer available in black. Owners should upgrad ...ts#24-08027-1|(24-08027-1) FRONT FENDER STREET TO WORK WITH SHOWA 24-08027-1 SUSPENSION BLACK #2]]
    50 KB (6,902 words) - 06:06, 27 April 2020
  • * [[XMX Platform/Wheels Parts#23-08067|(23-08067) WHEEL 1.85 X 21 XMX FRONT LACED WHEEL ASSY 1065 SPOKE]] * [[Steering Parts#90-02105|(90-02105) WASHER ISO 7093-1 6-200 HV ZM-F-01 REV 02]]
    42 KB (5,855 words) - 06:06, 27 April 2020
  • ...ts#24-08027-1|(24-08027-1) FRONT FENDER STREET TO WORK WITH SHOWA 24-08027-1 SUSPENSION BLACK #2]] * [[SDS Platform/Bodywork Parts#24-08207-1|(24-08207-1) S POWER TANK ASSEMBLY BLACK]]
    49 KB (6,687 words) - 06:07, 27 April 2020
  • ...rk Parts#24-08098-10|(24-08098-10) 24-08098-10 Option #1: YELLOW]] ...Option #6: RED 24-08099-10 Option #1: YELLOW]]
    22 KB (3,010 words) - 06:07, 27 April 2020
  • * [[XMX Platform/Bodywork Parts#24-05058-1|(24-05058-1) FAIRING FRONT RIGHT POLYPROPOLENE WHITE]] * [[XMX Platform/Bodywork Parts#24-05059-1|(24-05059-1) 24-05059-1 FAIRING FRONT LEFT POLYPROPOLENE WHITE]]
    22 KB (3,060 words) - 06:07, 27 April 2020
  • |- id="1" |[[#1|1]]||High [[Throttle|Throttle]]||
    7 KB (872 words) - 00:00, 2 May 2020
  • Throttle Switch 1 OK ;Level 1?
    24 KB (1,819 words) - 20:37, 28 July 2020
  • * For [[SDS Platform]] models, 4 chargers are wired 2s2p for 1.3kW total. {{Special:PrefixIndex/Gen2/Meanwell Charger/|stripprefix=1}}
    1 KB (177 words) - 00:06, 10 July 2020